I wrapped up another field day with my friend Paul (W7PEZ) in Eastern Washington. For the two days, I had 204 contacts, broken out roughly as: Paul worked 200 contacts, nearly all CW. Both are personal records. Neither of us were “running,” which would certainly have bumped up the totals, nor did we operate all […]
Notes on Field Day 2023 Read More »
In geocaching, there are a lot of “challenges” published, where in addition to signing the log, you have an alternative logging requirement (“ALR”) to perform some feat. These can be as simple as “find 10 mystery caches” or “find a cache for every letter in the alphabet,” or more complicated. In my 15 years, I’ve
My first HF radio, the Elecraft KX3, was air-cooled and got me spoiled to the relatively quiet operation. The K4D, on the other hand, has two fans. Although the “base” ventilation speed has been lowered, there’s also some whining from the bearings. Most hams can’t hear it, I, unfortunately, can and don’t enjoy the sound.
Quieter fans on the Elecraft K4D Read More »
In mid-December, N1MM (version 1.0.9758) introduced a spectrum display option supporting the Elecraft K4 radio. Below is a walk-through on setting it up. For this to work, your radio will need to be connected to your local network. You can check this by tapping the Menu option and scrolling to the middle. You should see
Displaying K4 Spectrum in N1MM Read More »
With my KX3, using N1MM+ to manage CW sending was accomplished via an indirect set of KX3 macros and keyboard sequences. Thus, we had this awfulness: Bob (N6TV) presented at the Spokane DX Association and mentioned this on slides 52, 62, and 63 of his presentation. There is a lot of good information in his
Configuring N1MM+ CW for the Elecraft K4 Read More »
After a year, my new Elecraft K4D has arrived. To any new owner, I’d highly recommend grabbing Bob (N6TV’s) general setup checklist. There are also some great presentations on Bob’s QRZ page. There were a lot of steps necessary to set it up with WSJTX’s FT8 that I thought would be worth expanding here with
Configuring Elecraft K4D for WSJTX / FT8 Read More »